Article - Open Access.

Idioma principal | Segundo idioma

Ceramic Additive Manufacturing in Architecture Computational Methodology for Defining a Column System

Ceramic Additive Manufacturing in Architecture Computational Methodology for Defining a Column System

Moreira, João; Figueiredo, Bruno; Cruz, Paulo;

Article:

The present paper describes a research that explores the design and production ofcustomised architectural ceramic components defined through parametricrelations of biomorphic inspiration and to be built through additivemanufacturing. In this sense, is presented a case study that develops a system ofboth architectural and structural components - a column system. The definitionprocess of the system is mediated by computational design, implementing not onlystructural analysis and optimization strategies, but also mimetic formalcharacteristics of nature to an initial grid, creating a model that adapts its formalattributes, depending on its assumptions and the material constraints. Thisprocess resulted in the definition of a set of solutions that better answer to aspecific design problem.

Article:

The present paper describes a research that explores the design and production ofcustomised architectural ceramic components defined through parametricrelations of biomorphic inspiration and to be built through additivemanufacturing. In this sense, is presented a case study that develops a system ofboth architectural and structural components - a column system. The definitionprocess of the system is mediated by computational design, implementing not onlystructural analysis and optimization strategies, but also mimetic formalcharacteristics of nature to an initial grid, creating a model that adapts its formalattributes, depending on its assumptions and the material constraints. Thisprocess resulted in the definition of a set of solutions that better answer to aspecific design problem.

Palavras-chave: ,

Palavras-chave: ,

DOI: 10.5151/proceedings-ecaadesigradi2019_455

Referências bibliográficas
  • [1] .
Como citar:

Moreira, João; Figueiredo, Bruno; Cruz, Paulo; "Ceramic Additive Manufacturing in Architecture Computational Methodology for Defining a Column System", p. 471-476 . In: Proceedings of 37 eCAADe and XXIII SIGraDi Joint Conference, “Architecture in the Age of the 4Th Industrial Revolution”, Porto 2019, Sousa, José Pedro; Henriques, Gonçalo Castro; Xavier, João Pedro (eds.). São Paulo: Blucher, 2019.
ISSN 2318-6968, DOI 10.5151/proceedings-ecaadesigradi2019_455

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações