fevereiro 2015 vol. 1 num. 2 - XX Congresso Brasileiro de Engenharia Química

Artigo - Open Access.

Idioma principal

IMPLICATIONS OF A STATE-SPACE APPROACH FOR THE ECONOMIC OPTIMAL DESIGN OF A NGCC POWER PLANT

GODOY, E.; BENZ, S. J.; SCENNA, N. J.;

Artigo:

A detailed state-space approach is here embedded in the optimization model for the economic design of a new natural gas combined cycle (NGCC) power plant. This proposal comprehensively quantifies the impact of different adopted values for two critical parameters: the number of simultaneously and independently failed components, and the number of simultaneous events. The former depicts the maximum number of components (gas turbines, steam turbine, HRSGs, auxiliary services, etc.) that seem feasible to fail because of independent causes at the same time. The latter describes the maximum number of transitions between operating conditions, which is directly linked to the amount of available maintenance resources (personnel, parts, etc). Implications of a wide array of values for these two parameters over the economic optimal solutions are thoroughly discussed, where it is observed that more accurate and detailed estimations of the expected economic performance for the project are attained.

Artigo:

Palavras-chave:

DOI: 10.5151/chemeng-cobeq2014-0828-23492-159098

Referências bibliográficas
  • [1] AGUILAR, O., KIM, J., PERRY, S., SMITH, R., 2008. Availability and reliability considerations in the design and optimization of flexible utility systems. Chem. Eng. Sci. 63 (14), 3569-3584.
  • [2] EL-NASHAR, A., 2008. Optimal design of a cogeneration plant for power and desalination taking equipment reliability into consideration. Desalination 229 (1-3), 21-3
  • [3] GODOY, E., BENZ, S., SCENNA, N., 2011. A strategy for the economic optimization of combined cycle gas turbine power plants by taking advantage of useful thermodynamic relationships. Appl. Therm. Eng. 31, 852-871.
  • [4] GODOY, E., SCENNA, N., BENZ, S., 2010. Families of optimal thermodynamic solutions for combined cycle gas turbine (CCGT) power plants. Appl. Therm. Eng. 30 (6-7), 569-576.
  • [5] GOEL, H., GRIEVINK, J., HERDER, P.,WEIJNEN, M., 2002. Integrating reliability optimization into chemical process synthesis. Reliab. Eng. Syst. Safe. 78 (3), 247-258.
  • [6] GOEL, H., GRIEVINK, J., HERDER, P., WEIJNEN, M., 2003. Optimal reliability design of process systems at the conceptual stage of design. In: Annual Reliability and Maintainability Symposium, IEEE, pp. 40-45.
  • [7] TERRAZAS-MORENO, S., GROSSMANN, I., WASSICK, J., BURY, S., 2010. Optimal design of reliable integrated chemical production sites. Comp. Chem. Eng. 34 (12), 1919-1936.
Como citar:

GODOY, E.; BENZ, S. J.; SCENNA, N. J.; "IMPLICATIONS OF A STATE-SPACE APPROACH FOR THE ECONOMIC OPTIMAL DESIGN OF A NGCC POWER PLANT", p. 11779-11786 . In: Anais do XX Congresso Brasileiro de Engenharia Química - COBEQ 2014 [= Blucher Chemical Engineering Proceedings, v.1, n.2]. São Paulo: Blucher, 2015.
ISSN 2359-1757, DOI 10.5151/chemeng-cobeq2014-0828-23492-159098

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações