Dezembro 2020 vol. 8 num. 4 - XXIV International Conference of the Iberoamerican Society of Digital Graphics

Conference full papers - Open Access.

Idioma principal

Pavilion BIO-FADEN 1.0: Experimental study of design and manufacture with digital technologies of bionic prototype inspired by the fruit peels of fruit species present in the Central-Western Region of Brazil

Pavilion BIO-FADEN 1.0: Experimental study of design and manufacture with digital technologies of bionic prototype inspired by the fruit peels of fruit species present in the Central-Western Region of Brazil

Guillen-Salas, Juan Carlos ; Silva, Neander Furtado ; Kallas, Luana Miranda Esper ;

Conference full papers:

This article aims to determine the possibilities and limitations of the digital design and digital fabrication process by section or 2D laser cut in the production of artifacts composed of double curvature faces inspired by the non-euclidean geometric shapes of fruits present in the Central-Western Region of Brazil: Annona Cherimolal/Annona Squamosa., Mauritia Flexuosa, Annona Muricata, and the Annona Squamosa. Where, the main conclusion is that a set of digital techniques, parametric design and digital fabrication by section or 2D laser cutting can enable the production of a bionic pavilion, in a complex and cellular form in Brasília - DF.

Conference full papers:

Download (PDF)

Palavras-chave: Bionics, Generative Design, Prototype, Digital Fabrication, Building Envelope,

Palavras-chave:

DOI: 10.5151/sigradi2020-115

Referências bibliográficas
  • [1] Acar, M. S. (2011) Bio-inspired design of a kinetic node for adaptable structures. 132 p. Dissertation (Master of Science in Architecture) – Department of Architecture, Graduate School of Engineering and Sciences, izmir Institute of Technology, Urla, izmir, Turkey.
  • [2] Bonwetsch, T. et al. (2006) The Informed Wall. applying additive digital fabrication techniques on architecture. In: ACADIA, p. 489-495.
  • [3] Caneparo, L. (2014) Digital Fabrication in Architecture, Engineering and Construction. Springer Science+Business Media Dordrecht: New York, London.
  • [4] Celani, G.; Duarte, J.; Pupo, R. (2010) Introducing digital fabrication laboratories in architecture schools. Planning and operating. Retrieved from http://www.fec.unicamp.br/~lapac/papers/celani-duarte-pupo- 2010.pdf. Access in: 04 nov. 2017.
  • [5] Cruz, L. S. da et al. Caracterização física e química das frações do fruto atemoia Gefner. Ciência Rural, Santa Maria, 2013. v.43, n.12, p.2280-2284, dez. Retrieved from http://www.scielo.br/pdf/cr/v43n12/a33713cr2012-0439.pdf. Access in: 31 may 2019.
  • [6] Dunn, N. (2012) Digital fabrication in architecture. Laurence King Publishing: London. 192 p.
  • [7] Estévez, A. T.; Navarro, D. (2016) Del microscopio electrónico a la estrategia digital en arquitectura. In: SIGraDi, p. 734- 742.9-11, November, - Buenos Aires, Argentina
  • [8] Gershenfeld, N. (2012) How to Make Almost Anything.The Digital Fabrication Revolution. Foreign Affairs. Volume 91, No. 6.
  • [9] Gruber, P. (2011).Biomimetics in architecture: Architecture of life and buildings. Springer-Verlag/Wien. Retrieved from file:///C:/Users/JnKrlos.VAIO/Downloads/Gruber-2011- Biomimeticsinarchitecturearchitectureoflifeandbuildings%20(1).pdf. Access in: 14 jun. 2017.
  • [10] Guillén-Salas, J. C.; Silva, N. F. (2021) Digital Fabrication Experimentations with Complex Form Modular Bionic Building Envelope with 3D Printing and Robotics Technology. In: H. RODRIGUES, et al. (eds) Sustainability and Automation in Smart Constructions, Advances in Science, Technology & Innovation. Springer Nature Switzerland AG 2021. p. 143-155. https://doi.org/1007/978-3-030-35533-3_18
  • [11] Guillen Salas, J. C. (2020) Projetação e Fabricação de Pavilhão Biomimético de Forma Complexa, Celular e Responsivo com Tecnologias Digitais e Robótica em Brasília – DF. 377 f. Tese (Doutorado em Arquitetura e Urbanismo) – Programa de Pós-Graduação de Arquitetura e Urbansimo, Universidade de Brasília, Brasília - DF, Brasil.
  • [12] Guzik, A. (2009) Digital fabrication inspired design: Influence of fabrication parameters on a design process. 71 p. Dissertation (Master of Science in Adaptive Architecture and Computation) - Bartlett School of Graduate Studies, University College of London, London, UK.
  • [13] Iwamoto, L. (2009) Digital fabrications. Architectural and material techniques. Princeton Architectural Press: New York, United States of America. 144 p.
  • [14] Kolarevic, B.; Klinger, K. R. (eds.) (2008) Manufacturing material effects: Rethinking design and making in architecture. Routledge is an imprint of the Taylor & Francis Group, an informa business: New York, United States of America. 321 p.
  • [15] Kolarevic, B. (ed.) (2003) Architecture in the digital age. design and manufacturing. Spon Press is an imprint of the Taylor & Francis Group.
  • [16] Kolarevic, B. (2001) Digital Fabrication: Manufacturing Architecture in the Information Age. In: ACADIA, 2001, Suny Buffalo, Proceedings… Buffalo, New York, United States of America. Section 4, p. 268-278.
  • [17] Mahmoud, E. (2010) Biomimicry: A New Approach to Enhance the Efficiency of Natural Ventilation Systems in Hot Climate. In: International Seminar Arquitectonics Network, Architecture and Research, Barcelona, Spain. Proceedings… Barcelona, 2010. Retrieved from https://pdfs.semanticscholar.org/204b/2efe8f55ff439e1586be 90a6ca0c6a5d9193.pdf?_ga=2.51571309.514357249.1578450818-1536409723.1546030185. Access in: 5 may 20
  • [18] Martins, P. F.; Sousa, J. P. (2014) Digital fabrication technology in concrete architecture. In: ECAADE, p. 475-484.
  • [19] Menges, A.; Schwinn, T.; Krieg, O. D. (2017) Advancing wood architecture. A computational approach. Routledge Taylor & Francis Group. London, New York. 259 p.
  • [20] Nachtigall, W.; Pohl, G. (2013) Bau-Bionik. Natur – Analogien – Technik. Springer-Verlag Berlin Heidelberg,
  • [21] Öztoprak, Z. A (2018) Biomimetic perspective on (retro)fitting of building envelopes. 200 p. Tese (Doctor of Philosophy) – Architecture, Graduate School of Natural and Applied Sciences, Middle East Technical University, Çankaya, Ankara, Turkey. Retrieved from http://etd.lib.metu.edu.tr/upload/12621923/index.pdf. Access in: 17 jul. 2019.
  • [22] Pohl, G.; Nachtigall, W. (2015) Biomimetics for architecture & design. Springer International Publishing. Switzerland.
  • [23] Reis, S. B.; Mello, A. C. M. P.; oliveira, D. M. T. (2017) Pericarp formation in early divergent species of Arecaceae (Calamoideae, Mauritiinae) and its ecological and phylogenetic importance. Plant Syst Evol 303:675–687. DOI 10.1007/s00606-017-1399-6. Retrieved from https://link- springer- com.ez54.periodicos.capes.gov.br/content/pdf/10.1007%2Fs 00606-017-1399-6.pdf. Access in: 31 may 2019.
  • [24] Sacramento, C. K. do et al. (2003) Caracterização física e química de frutos de três tipos de gravioleira (Annona muricata L.). Rev. Bras. Frutic., Jaboticabal - SP, v. 25, n. 2, p. 329-331, Agosto Disponível em: https://www.scielo.br/pdf/rbf/v25n2/a37v25n2.pdf. Acesso em: 31 maio 2019.
  • [25] Santos, R. C. dos et al. (2019) Atemoya fruit development and cyto-logical aspects of GA3-induced growth and parthenocarpy. Protoplasma. Retrieved from https://doi.org/10.1007/s00709-019-01382-2. Access in: 31 may 2019.
  • [26] Santos, R. C. dos et al. (2014) Stenospermy and seed development in the “Brazilian seedless” variety of sugar apple (Annona squamosa). Anais da Acade-mia Brasileira de Ciências 86(4): 2101-2108. Retrieved from http://dx.doi.org/10.1590/0001-3765201420140206. Access in: 31 may 2019.
  • [27] Scopigno, R. et al. (2015) Digital fabrication techniques for cultural heritage: A survey. In: COMPUTER GRAPHICS Forum. p. 1–17.
  • [28] Seely, J. C. K. (2004) Digital fabrication in the architectural design process. 77 p. Dissertation (Master of Science in Architecture Studies) - Massachusetts Institute of Technology, Massachusetts, Boston, United States of America.
  • [29] Silva, R. S. et al. (2014) Seed structure and germination in buriti (Mauritia flexuosa), the Swamp palm. Flora - Morphology, Distribution, Functional Ecology of Plants, Volume 209, Issue 11, November. Pages 674-685. Retrieved from https://doi.org/10.1016/j.flora.2014.08.012. Access in: 31 may 2019.
  • [30] Soares, T. L. de F. et al. (2016) Princípios Analógicos da Biomimética e sua aplicação nos Domus Geodésicos de Fuller. Retrieved from http://dx.doi.org/10.4995/IFDP.2016.3369. Access in: 27 may 2019
  • [31] Tübingen, D. H. B. aus. (2008) Bionisch inspirierte Gebäudehüllen. Konzeption einer Bionisch inspirierter Gebäudehülle nach dem Vorbild natürlicher Hüllen und Häute. 474 p. Tese (Doktor-Ingenieurs) - Fakultät Architektur und Stadtplanung, Universität Stuttgart. Stuttgart, Baden- Württemberg, Deuschland.
  • [32] Vincent, J. F. V. et al. (2006) Biomimetics: its practice and theory.
  • [33] J. R. Soc. Interface 3, 471–482. Retrieved from https://www.researchgate.net/publication/6937083_Biomimeti cs_Its_Practice_and_Theory. Access in: 4 nov. 2017.
  • [34] Wrangler, T. et al. (2016) Digital concrete: opportunities and challenges. RILEM Technical Letters 1: 67 – 75, ISSN 2518-0231, DOI 10.21809/rilemtechlett.2016.16
Como citar:

Guillen-Salas, Juan Carlos; Silva, Neander Furtado; Kallas, Luana Miranda Esper; "Pavilion BIO-FADEN 1.0: Experimental study of design and manufacture with digital technologies of bionic prototype inspired by the fruit peels of fruit species present in the Central-Western Region of Brazil", p. 847-854 . In: Congreso SIGraDi 2020. São Paulo: Blucher, 2020.
ISSN 2318-6968, DOI 10.5151/sigradi2020-115

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações