Artigo completo - Open Access.

Idioma principal | Segundo idioma

Modelagem e simulação de um sistema start/stop para redução de consumo de combustível e emissões de gases poluentes

Modeling and simulation of start/stop system for reduction of vehicle fuel consumption and air pollutant emissions

Silva, Samuel Filgueira ; Eckert, Jony Javorski ; Silva, Fabrício Leonardo ; Silva, Ludmila Corrêa de Alkmin ; Dedini, Franco Giuseppe ;

Artigo completo:

Nas últimas décadas, transportes eficientes tem se tornado uma das principais preocupações de muitos países do mundo. As normas de regulamentação estão cada vez mais rigorosas no que diz respeito à redução da economia de combustível e das emissões veicula

Artigo completo:

In the last decades, energy-efficient road transportation has become one of the major concerns of many countries worldwide. Governmental regulation standards are progressively strict with respect to the maximization of vehicle fuel economy as well as the

Palavras-chave: -,

Palavras-chave: -,

DOI: 10.5151/simea2021-PAP119

Referências bibliográficas
  • [1] M. Mace, “Mitigation Commitments under the Paris Agreement and the Way Forward,” Clim. Law, vol. 6, pp. 21–39, Jan. 2016.
  • [2] C. A. Horowitz, “Paris Agreement,” International Legal Materials, vol. 55, no. 4, pp. 740–755, 2016.
  • [3] R. Smit, P. Kingston, D. W. Neale, M. K. Brown, B. Verran, and T. Nolan, “Monitoring on-road air quality and measuring vehicle emissions with remote sensing in an urban area,” Atmospheric Environment, vol. 218, p. 116978, 2019.
  • [4] A. Faiz, “Automotive emissions in developing countries-relative implications for global warming, acidification and urban air quality,” Transportation Research Part A: Policy and Practice, vol. 27, no. 3, pp. 167–186, 1993.
  • [5] M. Ehsani, Y. Gao, and A. Emadi, Modern Electric, Hybrid Electric, and Fuel Cell Vehicles., 3rd Editio. Boca Raton: CRC Press, 2018.
  • [6] M. Abolhassani et al., Impact of Hybrid Electric Vehicles on the World’s Petroleum Consumption and Supply. 2003.
  • [7] R. G. Miller and S. R. Sorrell, “The future of oil supply,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 372, no. 2006, p. 20130179, Jan. 2014.
  • [8] Z. Miao, T. Baležentis, S. Shao, and D. Chang, “Energy use, industrial soot and vehicle exhaust pollution—China’s regional air pollution recognition, performance decomposition and governance,” Energy Economics, vol. 83, pp. 501–514, 2019.
  • [9] H. Yang, M. Ma, J. R. Thompson, and R. J. Flower, “Waste management, informal recycling, environmental pollution and public health.,” Journal of epidemiology and community health, vol. 72, no. 3, pp. 237–243, Mar. 2018.
  • [10] J. Wang et al., “Vehicle emission and atmospheric pollution in China: problems, progress, and prospects,” PeerJ, vol. 7, p. e6932, May 2019.
  • [11] T. Wang and S. Xie, “Assessment of traffic-related air pollution in the urban streets before and during the 2008 Beijing Olympic Games traffic control period,” Atmospheric Environment, vol. 43, no. 35, pp. 5682–5690, 2009.
  • [12] Lynette W. Cheah, “Cars on a Diet: The Material and Energy Impacts of Passenger Vehicle Weight Reduction in the U.S,” Ph.D. Thesis - Massachusetts Institute of Technology, Engineering Systems Division, 2010.
  • [13] Z. Mohamed-Kassim and A. Filippone, “Fuel savings on a heavy vehicle via aerodynamic drag reduction,” Transportation Research Part D: Transport and Environment, vol. 15, no. 5, pp. 275–284, 2010.
  • [14] R. Vitolo and S. d’Ambrosio, “Potential impact of active tire pressure management on fuel consumption reduction in passenger vehicles,” Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, Mar. 2018.
  • [15] H. Aldhufairi and O. Olatunbosun, “Developments in tyre design for lower rolling resistance: a state of the art review,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, p. 095440701772719, Nov. 2017.
  • [16] M. Goharimanesh, A. Akbari, and A. Akbarzadeh Tootoonchi, “More efficiency in fuel consumption using gearbox optimization based on Taguchi method,” Journal of Industrial Engineering International, vol. 10, no. 2, p. 61, 2014.
  • [17] S. F. Silva, E. M. Fernandes, and W. F. Amorim Junior, “Simulation-Driven Model-Based Approach for the Performance and Fuel Efficiency Trade-Off Evaluation of Vehicle Powertrain.” SAE International, 2019.
  • [18] J. W. G. Turner et al., “Ultra Boost for Economy: Extending the Limits of Extreme Engine Downsizing,” SAE Int. J. Engines, vol. 7, no. 1, pp. 387–417, 2014.
  • [19] J. J. Eckert, F. M. Santiciolli, R. Yamashita, F. C. Corrêa, L. C. A. Silva, and F. G. Dedini, “Fuzzy Gear Shifting Control Optimization to Improve Vehicle Performance, Fuel Consumption and Engine Emissions,” IET Control Theory & Applications, vol. 13, no. 16, pp. 2658–2669, 20
  • [20] J. J. Eckert, F. C. Corrêa, F. M. Santiciolli, E. D. S. Costa, H. J. Dionísio, and F. G. Dedini, “Vehicle gear shifting strategy optimization with respect to performance and fuel consumption,” Mechanics Based Design of Structures and Machines, vol. 44, no. 1–2, pp. 123–136, 2016.
  • [21] T. P. Barbosa, J. J. Eckert, L. C. A. Silva, L. A. R. da Silva, J. C. H. Gutiérrez, and F. G. Dedini, “Gear shifting optimization applied to a flex-fuel vehicle under real driving conditions,” Mechanics Based Design of Structures and Machines, pp. 1–18, 2020.
  • [22] J. Eckert, F. Santiciolli, L. Silva, F. Corrêa, and F. Dedini, “Design of an Aftermarket Hybridization Kit: Reducing Costs and Emissions Considering a Local Driving Cycle,” vol. 1, pp. 210–235, Mar. 2020.
  • [23] J. J. Eckert, L. C. de A. e Silva, E. dos S. Costa, F. M. Santiciolli, F. C. Corrêa, and F. G. Dedini, “Optimization of electric propulsion system for a hybridized vehicle,” Mechanics Based Design of Structures and Machines, vol. 47, no. 2, pp. 175–200, Mar. 2019.
  • [24] I. Shancita, H. H. Masjuki, M. A. Kalam, I. M. Rizwanul Fattah, M. M. Rashed, and H. K. Rashedul, “A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles,” Energy Conversion and Management, vol. 88, pp. 794–807, 2014.
  • [25] M. Furushou, K. Nishizawa, T. Iwasaki, and M. Tahara, “Stop-Start System with Compact Motor Generator and Newly Developed Direct Injection Gasoline Engine,” Apr. 2012.
  • [26] Green Car Congress, “Ford concentrates on control strategies for low-cost start-stop system for Fusion.” .
  • [27] S. Hawkins et al., “Development of General Motors’ eAssist Powertrain,” SAE International Journal of Alternative Powertrains, vol. 1, pp. 308–323, Jul. 2012.
  • [28] E. Wiedemann, M. Karl, C. Ebner, and A. Sonntag, “From the environmental model to the intelligent engine stop start system,” 18. Internationales Stuttgarter Symposium, Springer Fachmedien Wiesbaden, pp. 165–178, 2018.
  • [29] Robin Rockström, “An engine start/stop strategy for a hybrid city bus,” Master of Science Thesis, KTH Industrial Engineering and Management, 2009.
  • [30] M. V. Palwe and P. Kanjalkar, “Development and validation of enginestart/stop strategy for p2 hybrid electric vehicle,” Inventive Computation Technologies, Springer Interna-tional Publishing, pp. 59–66, 2020.
  • [31] J. Bishop, A. Nedungadi, G. Ostrowski, B. Surampudi, P. Armiroli, and E. Taspinar, An Engine Start/Stop System for Improved Fuel Economy. 2007.
  • [32] J. Wishart, M. Shirk, T. Gray, and N. Fengler, “Quantifying the Effects of Idle-Stop Systems on Fuel Economy in Light-Duty Passenger Vehicles,” SAE 2012 World Congress & Exhibition, Apr. 2012.
  • [33] N. Fonseca, J. Casanova, and M. Valdés, “Influence of the stop/start system on CO2 emissions of a diesel vehicle in urban traffic,” Transportation Research Part D: Transport and Environment, vol. 16, no. 2, pp. 194–200, 2011.
  • [34] L. A. DeBruin, “Energy and Feasibility Analysis of Gasoline Engine Start/Stop Technology,” B.S. Thesis, Ohio State University, 2013.
  • [35] L. Gaines, E. Rask, and G. Keller, “Which Is Greener: Idle, or Stop and Restart? Comparing Fuel Use and Emissions for Short Passenger-Car Stops,” Argonne National Laboratory, 2013.
  • [36] M. Matsuura, K. Korematsu, and J. Tanaka, “Fuel Consumption Improvement of Vehicles by Idling Stop.” SAE International , 2004.
  • [37] Q. Zhong, H. Qin, and R. Xu, “Study on the Start-Stop System Control Strategy under Different Driving Cycle,” in 2018 IEEE 14th International Conference on Control and Automation (ICCA), 2018, pp. 223–228.
  • [38] T. D. Gillespie, “Fundamentals of vehicle dynamics,” SAE Technical Paper, 1992.
  • [39] G. J. L. Naus, M. A. Beenakkers, R. G. M. Huisman, M. J. G. van de Molengraft, and M. Steinbuch, “Robust control of a clutch system to prevent judder-induced driveline oscillations,” Vehicle System Dynamics, vol. 48, no. 11, pp. 1379–1394, Nov. 2010.
  • [40] M. Kulkarni, T. Shim, and Y. Zhang, “Shift dynamics and control of dual-clutch transmissions,” Mechanism and Machine Theory, vol. 42, no. 2, pp. 168–182, 2007.
  • [41] R. N. Jazar, Vehicle Dynamics: Theory and Application. Springer New York, 2013.
  • [42] General Motors Brazil Ltda, “Owner Manual Chevrolet Celta 2013,” 2013.
  • [43] B. Kramer et al., “ADVISOR: a systems analysis tool for advanced vehicle modeling,” Journal of Power Sources, vol. 110, no. 2, pp. 255–266, 2002.
  • [44] M. L. M. Oliveira, C. M. Silva, R. Moreno-Tost, T. L. Farias, A. Jiménez-López, and E. Rodríguez-Castellón, “Modelling of NOx emission factors from heavy and light-duty vehicles equipped with advanced aftertreatment systems,” Energy Conversion and Management, vol. 52, no. 8, pp. 2945–2951, 2011.
  • [45] J. Eckert, F. Santiciolli, R. Yamashita, F. Correa, L. C. A. Silva, and F. Dedini, “Fuzzy Gear Shifting Control Optimization to Improve Vehicle Performance, Fuel Consumption and Engine Emissions,” IET Control Theory & Applications, Aug. 2019.
  • [46] J. J. Eckert, F. M. Santiciolli, L. C. A. Silva, and F. G. Dedini, “Vehicle drivetrain design multi-objective optimization,” Mechanism and Machine Theory, vol. 156, 2021.
  • [47] J. D. K. Bishop, M. E. J. Stettler, N. Molden, and A. M. Boies, “Engine maps of fuel use and emissions from transient driving cycles,” Applied Energy, vol. 183, pp. 202–217, 2016.
  • [48] J. J. Eckert et al., “Gear shifting multi-objective optimization to improve vehicle performance, fuel consumption, and engine emissions,” Mechanics Based Design of Structures and Machines, vol. 46, no. 2, 2018.
  • [49] NBR 6601, “Light road motor vehicles - Determination of hydrocarbons, carbon monoxide, nitrogen oxides, carbon dioxides and particulate matter in the exhaust gas.,” ABNT, 2012.
  • [50] A. M. Oliveira et al., “Evaluation of Energy Recovery Potential through Regenerative Braking for a Hybrid Electric Vehicle in a Real Urban Drive Scenario.” SAE International, 2016.
  • [51] J. J. Eckert et al., “Fuel consumption and emissions analysis for a hybridized vehicle,” in Anais do XXIV Simpósio Internacional de Engenharia Automotiva, 2016.
Como citar:

Silva, Samuel Filgueira; Eckert, Jony Javorski; Silva, Fabrício Leonardo; Silva, Ludmila Corrêa de Alkmin; Dedini, Franco Giuseppe; "Modelagem e simulação de um sistema start/stop para redução de consumo de combustível e emissões de gases poluentes", p. 486-498 . In: Anais do XXVIII SIMPÓSIO INTERNACIONAL DE ENGENHARIA AUTOMOTIVA. São Paulo: Blucher, 2021.
ISSN 2357-7592, DOI 10.5151/simea2021-PAP119

últimos 30 dias | último ano | desde a publicação