Article - Open Access.

Idioma principal

Mapeo de Interoperabilidad entre BIM y BPS Software (Simulación Energética) para Chile

Lobos, Danny; Wandersleben, Gerth; Castillo, Lorena Silva;


The Research focuses on possible links between (Building Information Modeling), the Building Energy Performance Requirements and BPS software (Building Performance Simulation). It is expected to establish critical paths within the interoperability processes between BIM and BPS to support architects and energy consultants to choose the most appropriated workflow for the analyzed buildings to fulfill the performance requirements given by the Chilean laws. Several study cases in interoperability and the state-of-the-art are presented and discussed. Finally a novel map of relation between these three areas is presented.


Palavras-chave: Building information modeling, Building performance simulation, Building performance standards, Architectural design, Interoperability,


DOI: 10.5151/despro-sigradi2013-0072

Referências bibliográficas
  • [1] AChEE (Agencia Chilena de Eficiencia Energética). (2012) Guía de eficiencia energética para establecimientos de Salud.
  • [2] AChEE (Agencia Chilena de Eficiencia Energética). (2012) Guía de eficiencia energética para establecimientos educacionales.
  • [3] Ali, S. (2010). Analysis Of Procedures And Workflow For Co nducting Energy Analysis Using Autodesk Revit, gbXML and Trace 700, SimBuild 2010, Fourth National Conference of IBPSA-USA, New York City, New York.
  • [4] Attia, S., Beltran, L., Herde, A. de Andamp; Hensen, JLM (2009)." Architect Friendly": a comparison of ten different building performance simulation tools.
  • [5] Bazjanac, V. (2005). Model based cost and energy performance estimation during schematic design. In 22nd Conference on Information Technology in Construction (pp. 677-688).
  • [6] Bazjanac, V. (2008). IFC BIM-based methodology for semi-automated building energy performance simulation. LBNL-919E.
  • [7] Cho, C. S., Chen, D., Andamp; Woo, S. (2011). Building Information Modeling (Bim)-Based Design Of Energy Efficient Buildings, Technical Report, S31-1.
  • [8] Eastman, C., Teicholz, P., Sacks, R., Andamp; Liston, K. (2011). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. Wiley. com.
  • [9] Gonzales, A. (2012). Evaluación De Herramientas De Simulación Energética Para Viviendas En Concepción, MSc Thesis, Universidad del Bío-Bío, Chile
  • [10] Graneros, A. (2013). Aprendizaje integrado de Arquitectura: Mediante vistas interiores graduadas, Tésis de Doctorado, Universidad del BioBio, Chile.
  • [11] Kumar, S. (2008). Interoperability between building information models (BIM) and energy analysis programs. ProQuest.
  • [12] Lobos, D. (2011), BIM Supported Building Envelopes and Space Layout based on a case study in South America, Bauhaus University Weimar Press, Weimar.
  • [13] Ministerio de Obras Públicas. (2012). Manual de la Gestión Energética en Edificios Públicos. Santiago, Chile.
  • [14] O’Donnell, J. T., Maile, T., Cody Rose, N., Mrazović, E. M., Regnier, C., Parrish, K., Andamp; Bazjanac, V. (2013). Transforming BIM to BEM: Generation of Building Geometry for the NASA Ames Sustainability Base BIM.
  • [15] Osello, A., Cangialosi, G., Dalmasso, D., Di Paolo, A., Turco, M. L., Piumatti, P., Andamp; Vozzola, M. (2011) Architecture Data And Energy Efficiency Simulations: Bim And Interoperability Standards. Proceedings of Building Simulation 2011, Sydney.
  • [16] Tse, T. C. (2009). The interoperability of building information models and document models in the Hong Kong construction industry.
  • [17] U.S. Departament of Energy (
  • [18] U.S. General Services Administration Public Buildings Service. (2012). GSA Building Information Modeling Guide Series 05, Energy Performance and Operations.
  • [19] WU, W. and ISSA, R.R.A., (2010). Feasibility of integrating building information modeling and LEED® certification process. In Computing in Civil and Building Engineering, Proceedings of the International Conference, W. TIZANI (Editor), 30 June-2 July, Nottingham, UK, Nottingham University Press, 81, 161, ISBN 978-1-907284-60-1
Como citar:

Lobos, Danny; Wandersleben, Gerth; Castillo, Lorena Silva; "Mapeo de Interoperabilidad entre BIM y BPS Software (Simulación Energética) para Chile", p. 378-382 . In: Proceedings of the XVII Conference of the Iberoamerican Society of Digital Graphics: Knowledge-based Design [=Blucher Design Proceedings, v.1, n.7]. São Paulo: Blucher, 2014.
ISSN 2318-6968, DOI 10.5151/despro-sigradi2013-0072

últimos 30 dias | último ano | desde a publicação