Blucher Design Proceedings

Dezembro 2020, vol.8, num.4 - XXIV International Conference of the Iberoamerican Society of Digital Graphics
Conference full papers - Open Access Idioma principal | Segundo principal

Digital Fabrication Techniques: A systematic literature review

Digital Fabrication Techniques: A systematic literature review

Nome, Carlos; Felipe, Bárbara L.

Conference full papers:

The materialization of architectural forms uses new processes aided by digital manufacturing techniques (FD). Five FD techniques stand out: sectioning (serial planes), tessellation, folding, contouring, and forming. This article's objective is to characterize the state of the art of these techniques, from 2009 to 2020 in national and international research bases. The Systematic Literature Review is used from three stages and nine protocol phases. The results indicate the techniques, methods, computer simulations, and applicability in more recurrent materials.

The materialization of architectural forms uses new processes aided by digital manufacturing techniques (FD). Five FD techniques stand out: sectioning (serial planes), tessellation, folding, contouring, and forming. This article's objective is to characterize the state of the art of these techniques, from 2009 to 2020 in national and international research bases. The Systematic Literature Review is used from three stages and nine protocol phases. The results indicate the techniques, methods, computer simulations, and applicability in more recurrent materials.

Download (PDF)

Palavras-chave:

DOI: 10.5151/sigradi2020-2

Referências bibliográficas
  • [1] Archdaily. (2020). Revitalização One Main Office. Recuperado 2 de outubro de 2020, de https://www.archdaily.com.br/br/789806/one-main-office- renovation-decoi-architects?ad_medium=gallery
  • [2] ArchDaily Brasil. (2020). Terminal Internacional de Passageiros de Yokohama. Recuperado 2 de outubro de 2020, de https://www.archdaily.com.br/br/792391/classicos-da- arquitetura-terminal-internacional-de-passageiros-de- yokohama-foreign-office-architects-foa
  • [3] Architectuul. (2020). American Cement Building. Recuperado 2 de outubro de 2020, de http://architectuul.com/architecture/american-cement- building
  • [4] Celani, M. G. C., & Pupo, R. T. (2008). Prototipagem Rápida e Fabricação Digital para Arquitetura e Construção: Definições e Estado da Arte no Brasil. Cadernos de Pós- Graduação em Arquitetura e Urbanismo, 8(1).
  • [5] Dresch, A., Lacerda, D. P., & Júnior, J. A. V. A. (2015). Design Science Research. Método de Pesquisa Para Avanço da Ciência e Tecnologia (Edição: 1a). Bookman.
  • [6] Dunn, N. (2012). Digital Fabrication in Architecture (Edição: 01). London: Laurence King.
  • [7] Estévez, A. T., & Navarro, D. (2017). Biomanufacturing the Future: Biodigital Architecture & Genetics. Procedia Manufacturing, 12(December 2016), 7–16. Recuperado de https://doi.org/10.1016/j.promfg.2017.08.002
  • [8] Iwamoto, L. (2009). Digital Fabrications: Architectural and Material Techniques (144 p. edi). New York: Princeton Architectural Press.
  • [9] Jabi, W. (2013). Parametric design for architecture. Londres: Laurence King Publishing.
  • [10] Kolarevic, B. (2001). Digital Fabrication: Manufacturing Architecture in the Information Age. In Reinventing the discourse - How digital tools help bridge and transform research, education and practice in architecture: Proceedings of the twenty first annual conference of the association for computer-aided design in architecture (p. 268–278). Buffalo, NY: Association for Computer-Aided Design in Architecture.
  • [11] Kolarevic, B. (2003). Architecture in the Digital Age: Design and Manufacturing (Edição: 1). New York; London: Taylor & Francis Group.
  • [12] Kolaveric, B. (2000). Digital Architectures. In Eternity, Infinity and Virtuality in Architecture:Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture (p. 251–256). Washington D.C.: Catholic University.
  • [13] Ouagne, P., Soulat, D., Moothoo, J., Capelle, E., & Gueret, S. (2013). Complex shape forming of a flax woven fabric; Analysis of the tow buckling and misalignment defect. Composites Part A: Applied Science and Manufacturing, 51, 1–10. Recuperado de https://doi.org/10.1016/j.compositesa.2013.03.017
  • [14] Oxman, N., & Rosenberg, J. L. (2007). Material-based Design Computation: an Inquiry into Digital Simulation of Physical Material Properties as Design Generators. International Journal of Architectural Computing 5, 5(1), 26–44. Recuperado de https://doi.org/10.1260/147807707780912985
  • [15] Oxman, R. (2006). Theory and design in the first digital age. Design Studies, 27(3), 229–265. Recuperado de https://doi.org/10.1016/j.destud.2005.11.002
  • [16] Pupo, R., & Celani, G. (2011). Prototipagem rápida e fabricação digital na arquitetura: fundamentação e formação. In O Processo de Projeto em Arquitetura: da Teoria à Tecnologia. São Paulo: Oficina de Textos.
  • [17] Reichert, S., Schwinn, T., La Magna, R., Waimer, F., Knippers, J., & Menges, A. (2014). Fibrous structures: An integrative approach to design computation, simulation and fabrication for lightweight, glass and carbon fibre composite structures in architecture based on biomimetic design principles. CAD Computer Aided Design, 52, 27–39. Recuperado de https://doi.org/10.1016/j.cad.2014.02.005
  • [18] Sass, L., & Oxman, R. (2006). Materializing design: The implications of rapid prototyping in digital design. Design Studies, 27(3), 325–355. Recuperado de https://doi.org/10.1016/j.destud.2005.11.009
  • [19] Stavric, M., & Wiltsche, A. (2016). Quadrilateral Patterns for Rigid Folding Structures. International Journal of Architectural Computing, 12(1), 61–79.
  • [20] STUDIO, F. (2020). AIRSPACE TOKYO. Recuperado 2 de outubro de 2020, de https://faulders- studio.com/AIRSPACE-TOKYO
  • [21] Tamke, M., & Thomsen, M. R. (2008). Designing Parametric Timber. Architecture “in computro”: Integrating methods and techniques, 609–616.
  • [22] Tranfield, D., Denyer, D., & Smart, P. (2003). Towards a Methodology for Developing Evidence-Informed Management Knowledge by Means of Systematic Review. British Journal of Management, 14(3), 207–222. Recuperado de https://doi.org/10.1111/1467-8551.00375
  • [23] Yuan, P. (2016). Parametric regionalism. Architectural Design, 86(2), 92–99. Recuperado de https://doi.org/10.1002/ad.2029
Como citar:

Nome, Carlos; Felipe, Bárbara L.; "Digital Fabrication Techniques: A systematic literature review", p-9-16. In: Congreso SIGraDi 2020. São Paulo: Blucher, 2020.
ISSN 23186968, DOI 10.5151/sigradi2020-2

últimos 30 dias

286
downloads

439
visualizações

954
indexações