Dezembro 2020 vol. 8 num. 4 - XXIV International Conference of the Iberoamerican Society of Digital Graphics

Conference full papers - Open Access.

Idioma principal

BIM-modeling and programming of curved concrete walls for 3D-printed construction

BIM-modeling and programming of curved concrete walls for 3D-printed construction

Arboleda Pardo, Juan Gabriel ; García-Alvarado, Rodrigo ; Martínez Rocamora, Alejandro ;

Conference full papers:

This article presents the parametric design and modeling in BIM of curved walls for 3d-printed construction in concrete, seeking to manage the reduction of materials and construction execution times, and enhance its architectural expression. The process described here is structured in the following phases: (i) conceptual preliminary design exploration, defining formal parameters in Revit, (ii) parametric modeling with Dynamo and Revit, (iii) integration of structural validation and printing programming of the robotic arm, and examples of execution with 3D-printed construction.

Conference full papers:

Download (PDF)

Palavras-chave: BIM, Parametric programming, 3D-printed Construction, Curved wall, Digital fabrication,

Palavras-chave:

DOI: 10.5151/sigradi2020-41

Referências bibliográficas
  • [1] Al Jassmi, H., Al Najjar, F., & Mourad, A. H. I. (2018). Large-scale 3D Printing: The way forward. IOP Conference Series: Materials Science and Engineering, 324(1). https://doi.org/10.1088/1757-899X/324/1/012088
  • [2] Bakir, A., & Balchi, I. (2018). Development and implementation of robotics in construction. A case study of a contractor firm. Chalmers University of Techonology.
  • [3] Berman, B. (2012). 3-D printing: The new industrial revolution. Business Horizons, 55(2), 155–162. https://doi.org/10.1016/j.bushor.2011.11.003
  • [4] Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016). Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. Virtual and Physical Prototyping, 11(3), 209–225. https://doi.org/10.1080/17452759.2016.1209867
  • [5] Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007). Freeform construction: Mega-scale rapid manufacturing for construction. Automation in Construction, 16(2), 224–231. https://doi.org/10.1016/j.autcon.2006.0002
  • [6] Cho, S., Kruger, J., Zeranka, S., & Zijl, G. Van. (2019). 3D Printable concrete technology.
  • [7] Coulter, F. B., Coulter, B. S., Papastavrou, E., & Ianakiev, A. (2018). Production techniques for 3D Printed inflatable elastomer structures: Part II-Four-axis direct ink writing on irregular double-curved and inflatable surfaces. 3D Printing and Additive Manufacturing, 5(1), 17–2 https://doi.org/10.1089/3dp.2010069
  • [8] Craveiro, F., Nazarian, S., Bartolo, H., Bartolo, P. J., & Pinto Duarte, J. (2020). An automated system for 3D printing functionally graded concrete-based materials. Additive Manufacturing, 33.
  • [9] https://doi.org/10.1016/j.addma.2020.101146
  • [10] Cui, Q., & Yue, F. (2020). Parametric design of personalized 3D Printed sneakers. In Proceedings of the 2019 Digital Futures (pp. 82–92). Springer Singapore. https://doi.org/1007/978-981-13-8153-9
  • [11] García-Alvarado, R. (2018). Initial developments and projections of 3D Construction printing. In ARCC Conference Repository.
  • [12] Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016). Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders. Materials and Design, 100, 102– 109. https://doi.org/10.1016/j.matdes.2016.03.097
  • [13] Hager, I., Golonka, A., & Putanowicz, R. (2016). 3D Printing of buildings and building components as the future of sustainable construction? Procedia Engineering, 151, 292–
  • [14] 299. https://doi.org/10.1016/j.proeng.2016.07.357
  • [15] Hidalgo-Quezada, N. E., & Valdebenito-Núñez, M. I. (2020). Análisis de volcamiento de muros curvos con diferentes geometrías para construcción aditiva. Memoria de título en Ingeniería Civil. Universidad del Bío Bío.
  • [16] Izard, J.-B., Dubor, A., Hervé, P.-E., Cabay, E., Culla, D., Rodriguez, M., & Barrado, M. (2017). Large-scale 3D printing with cable-driven parallel robots. Construction Robotics, 1(1–4), 69–76. https://doi.org/10.1007/s41693-
  • [17] 017-0008-0
  • [18] Kontovourkis, O., & Tryfonos, G. (2018). Integrating parametric design with robotic additive manufacturing for 3D clay printing: An experimental study. ISARC 2018 - 35th International Symposium on Automation and Robotics in Construction and International AEC/FM Hackathon: The Future of Building Things, (Isarc). https://doi.org/10.22260/isarc2018/0128
  • [19] Kontovourkis, Odysseas, & Tryfonos, G. (2020). Robotic 3D clay printing of prefabricated non-conventional wall components based on a parametric-integrated design. Automation in Construction, 110(November 2019), 103005.
  • [20] https://doi.org/10.1016/j.autcon.2019.103005
  • [21] Lim, S., Buswell, R. A., Valentine, P. J., Piker, D., Austin, S. A., & De Kestelier, X. (2016). Modelling curved-layered printing paths for fabricating large-scale construction components. Additive Manufacturing, 12, 216–230. https://doi.org/10.1016/j.addma.2016.06.004
  • [22] Martínez-Rocamora, A., García-Alvarado, R., Casanova-Medina, E., González-Böhme, L. F., & Auat-Cheein, F. (2020a). Parametric programming of 3D printed curved walls for cost-efficient building design. Journal of Construction Engineering and Management, 146(5), 1–13. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001811
  • [23] Martínez-Rocamora, A., García-Alvarado, R., Casanova-Medina, E., González-Böhme, L. F., & Auat-Cheein, F. (2020b). Parametric programming of 3D Printed curved walls for cost-efficient building design. Journal of Construction Engineering and Management, 146(5), 1–13. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001811
  • [24] Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019). Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing. Automation in Construction, 107(August), 102933. https://doi.org/10.1016/j.autcon.2019.102933
  • [25] Monedero, J. (2000). Parametric design: A review and some experiences. Automation in Construction, 9(4), 369–377. https://doi.org/10.1016/S0926-5805(99)00020-5
  • [26] Muthumanickam, N. K., Park, K., Duarte, J. P., Nazarian, S., Memari, A., & Bilén, S. G. (2020). BIM for parametric problem formulation, optioneering, and 4D simulation of 3D- printed Martian habitat: A case study of NASA’s 3D Printed Habitat Challenge. In 5th Residential Building Design & Construction (RBDC). State College, PA.
  • [27] Nair, S. A. O., Panda, S., Santhanam, M., Sant, G., & Neithalath,
  • [28] N. (2020). A critical examination of the influence of material characteristics and extruder geometry on 3D printing of cementitious binders. Cement and Concrete Composites, 112, 103671.
  • [29] https://doi.org/10.1016/j.cemconcomp.2020.103671
  • [30] Pérez-Ortiz, J. I., & Vásquez-Zúñiga, Á. G. (2020). Protocolos de comunicación entre modelos BIM y hormigones impresos en 3D. Memoria de título en Ingeniería Civil. Universidad del Bío Bío.
  • [31] Perkins, I., & Skitmore, M. (2015). Three-dimensional printing in the construction industry: A review. International Journal of Construction Management, 15(1), 1–9. https://doi.org/10.1080/15623599.2015.1012136
  • [32] Salminen, S., & Tallberg, T. (1996). Human errors in fatal and serious occupational accidents in Finland. Ergonomics, 39(7), 980–988.
  • [33] https://doi.org/10.1080/00140139608964518
  • [34] Sánchez Gómez, S., Alapont Ramón, J. L., Bono Cremades, J., & Catalán Tamarit, F. J. (2020). Printed building in Morocco : 3D Printed concrete prototype for the Solar Decathlon Africa 2019. In 9o Congreso Internacional de Arquitectura Blanca - CIAB (pp. 298–305). Valencia: Universidad Politécnica de Valéncia.
  • [35] Sorock, G. S., O’Hagen Smith, E., & Goldoff, M. (1993). Fatal occupational injuries in the New Jersey construction industry, 1983 to 1989. Journal of Medicine, 35, 916–921.
  • [36] Suzuki, R., Yatani, K., Gross, M. D., & Yeh, T. (2018). Tabby :
  • [37] Explorable design for 3D Printing textures, 2–5.
  • [38] Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan,
  • [39] M. J., & Leong, K. F. (2017). 3D printing trends in building and construction industry: a review. Virtual and Physical Prototyping, 12(3), 261–276. https://doi.org/10.1080/17452759.2017.1326724
  • [40] Teizer, J., Blickle, A., King, T., Leitzbach, O., & Guenther, D. (2016). Large scale 3D printing of complex geometric shapes in construction. ISARC 2016 - 33rd International Symposium on Automation and Robotics in Construction, i(Isarc), 948–956. https://doi.org/10.22260/isarc2016/0114
  • [41] Teizer, J., Blickle, A., King, T., Leitzbach, O., Guenther, D., Mattern, H., & König, M. (2018). BIM for 3D printing in construction. Building Information Modeling: Technology Foundations and Industry Practice, 421–446. https://doi.org/10.1007/978-3-319-92862-3_26
  • [42] Uppala, S. sandeep, & Tadikamalla, M. (2017). Review paper a review on 3D Printing of concrete - the future of sustainable construction. I-Manager’s Journal on Civil Engineering, 7(3), 2017.
  • [43] Wolfs, R. J. M., & Suiker, A. S. J. (2019). Structural failure during extrusion-based 3D printing processes. International Journal of Advanced Manufacturing Technology, 104(1–4), 565–584. https://doi.org/10.1007/s00170-019-03844-6
  • [44] Yin, H., Qu, M., Zhang, H., & Lim, Y. C. (2018). 3D Printing and buildings: A technology review and future outlook. Technology Architecture and Design, 2(1), 94–111. https://doi.org/10.1080/24751448.2018.1420968
  • [45] Zareiyan, B., & Khoshnevis, B. (2017). Interlayer adhesion and strength of structures in Contour Crafting - Effects of aggregate size, extrusion rate, and layer thickness. Automation in Construction, 81(June), 112–121. https://doi.org/10.1016/j.autcon.2017.06.013
Como citar:

Arboleda Pardo, Juan Gabriel; García-Alvarado, Rodrigo; Martínez Rocamora, Alejandro; "BIM-modeling and programming of curved concrete walls for 3D-printed construction", p. 297-305 . In: Congreso SIGraDi 2020. São Paulo: Blucher, 2020.
ISSN 2318-6968, DOI 10.5151/sigradi2020-41

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações