Dezembro 2021 vol. 8 num. 4 - VII Simpósio Internacional de Inovação e Tecnologia
Original Article - Open Access.
AVALIAÇÃO DE MODELOS DE DEPOSIÇÃO ORIGINAIS (EBERT-PANCHAL E POLLEY) E MODIFICADOS PARA MODELAGEM DE DADOS OBTIDOS EM REFINARIA
EVALUATION OF ORIGINAL DEPOSITION MODELS (EBERTPANCHAL AND POLLEY) AND MODIFIED FOR MODELING DATA
Villardi, Hugo Gomes D’Amato ; Souza, Ana Lucia Barbosa de ; Orrico, Lucas Cunha ; Miguel Junior, Antonio Rimaci ; Pessoa, Fernando Luiz Pellegrini ;
Original Article:
The fouling phenomenon entails undesirable costs for the main industrial sectors. In the oil and gas industry oil preheat battery exchangers have serious problems with this. In the present work, predictive models based on the deposition threshold were evaluated. The methodology was based on the original proposals and on modifications using parameter estimation with the minimization of calculated and experimental data. The results point to the deficiency of the models in predicting the fouling behavior in exchangers, considering the deposition in the hull and in the tube, since they were validated with tube data and with fixed values of physical properties.
Original Article:
The fouling phenomenon entails undesirable costs for the main industrial sectors. In the oil and gas industry oil preheat battery exchangers have serious problems with this. In the present work, predictive models based on the deposition threshold were evaluated. The methodology was based on the original proposals and on modifications using parameter estimation with the minimization of calculated and experimental data. The results point to the deficiency of the models in predicting the fouling behavior in exchangers, considering the deposition in the hull and in the tube, since they were validated with tube data and with fixed values of physical properties.
Palavras-chave: Deposição; Trocador de calor; Refinaria; Modelagem; Petróleo,
Palavras-chave: Fouling; Heat exchanger; Refinery; Modelling; Oil,
DOI: 10.5151/siintec2021-208688
Referências bibliográficas
- [1] "1 S. Isogai and M. Nakamura, “Analysis and Steps to Mitigate Heat Exchanger Fouling in an Aromatics Plant Shinji,” 2003, [Online]. Available: http://dc.engconfintl.org/heatexchanger/30.
- [2] 2 D. Deka and D. Datta, “Multi-objective optimization of the scheduling of a heat exchanger network under milk fouling,” Knowledge-Based Syst., vol. 121, pp. 71–82, Apr. 2017, doi: 10.1016/j.knosys.2016.1027.
- [3] 3 L. F. Melo, T. R. Bott, and C. A. Bernardo, Fouling Science and Technology. Dordrecht: Springer Netherlands, 1988.
- [4] 4 A. P. Watkinson and D. I. Wilson, “Chemical reaction fouling: A review,” Exp. Therm. Fluid Sci., vol. 14, no. 4, pp. 361–374, 1997, doi: 10.1016/S0894-1777(96)00138-0.
- [5] 5 W. Ebert and C. B. Panchal, “Analysis of Exxon Crude-Oil-Slip Stream Coking Data.” 199
- [6] 6 G. T. Polley, D. I. Wilson, B. L. Yeap, and S. J. Pugh, “Evaluation of laboratory crude oil threshold fouling data for application to refinery pre-heat trains,” Appl. Therm. Eng., vol. 22, no. 7, pp. 777–788, May 2002, doi: 10.1016/S1359-4311(02)00023-
- [7] 7 J. G. Knudsen, D. Lin, and W. A. Ebert, “The determination of the threshold fouling curve for a crude oil,” Underst. Heat Exch. Fouling Its Mitig., vol. 265, p. 272, 1999.
- [8] 8 C. B. Panchal, W. C. Kuru, W. C. Kuru, and W. A. Ebert, “Threshold conditions for crude oil fouling,” in Understanding Heat Exchanger Fouling and its Mitigation, 1999, pp. 273–281."
Como citar:
Villardi, Hugo Gomes D’Amato; Souza, Ana Lucia Barbosa de; Orrico, Lucas Cunha; Miguel Junior, Antonio Rimaci; Pessoa, Fernando Luiz Pellegrini; "AVALIAÇÃO DE MODELOS DE DEPOSIÇÃO ORIGINAIS (EBERT-PANCHAL E POLLEY) E MODIFICADOS PARA MODELAGEM DE DADOS OBTIDOS EM REFINARIA", p. 455-461 . In: VII International Symposium on Innovation and Technology.
São Paulo: Blucher,
2021.
ISSN 2357-7592,
DOI 10.5151/siintec2021-208688
últimos 30 dias | último ano | desde a publicação
downloads
visualizações
indexações