Artigo Completo - Open Access.

Idioma principal

DODECYLAMINE FUNCTIONALIZATION OF CNT: THERMAL STABILITY AND DISPERSION

FERREIRA, F. V.; FRANCISCO, W.; CIVIDANES, L. S.; COUTINHO, A. R.; THIM, G. P.;

Artigo Completo:

Artigo Completo:

In this work, a dispersion study of carbon nanotubes (CNTs) functionalized with carboxylic and alkanes groups in various solvents are performed. CNT was treated using H2SO4/HNO3, and functionalized subsequently by dodecylamine (DDA). The surface modification was confirmed by Fourier transform infrared and X-ray photoelectron spectroscopy. The thermal stabilities were studied by Thermogravimetric analysis. The dispersion state of CNTs in the solvents was based on visual observations. Evaluation of the solvent influence by itself was also made. Results confirmed the presence of oxygen-containing and alkanes groups on CNTs surfaces. Dispersion stability was strongly dependent on solvent and carbon nanotubes surface interactions, which can vary with the chemical nature of the solvent. The study of dispersion stability of the nanotubes with different solvents is relevant to the full understanding of its applications.

Palavras-chave: ,

Palavras-chave: ,

DOI: 10.5151/chemeng-cobeqic2015-159-32587-247984

Referências bibliográficas
  • [1] ANTUNES, E.; RESENDE, V. de.; MENGUI, U.; CUNHA, J.; CORAT, E.; MASSI, M. Analyses of residual iron in carbon nanotubes produced by camphor/ferrocene pyrolysis and purified by high temperature annealing. Applied Surface Science.,v.257,p. 8038-8043, 201
  • [2] BEHNAMA, B.; SHIERB, W.; NIAA, A.; ABNOUS, K. Non-covalent functionalization of single-walled carbon nanotubes with modified polyethyleneimines for eficient gene delivery. International Journal of Pharmaceutics., v.454,p. 204-215, 2013.
  • [3] BENAZZOUZ, A.; MOITY, L.; PIERLOT, C.; MOLINIER, V.; AUBRY, J. Hansen approach versus cosmors for predicting the solubility of an organic uv filter in cosmetic solvent. Colloids and Surfaces A:Physicochem.Eng.Aspects, 2014.
  • [4] CAVNESS, B.; HEIMBECKER, J.; VELASQUEZ, J.; WILLIAMS, S. X-ray fluorescence as a method of monitoring metal catalyst content during the purification of carbon nanotubes. Radiation Physics and Chemistry., v.81,p. 131-134, 2012.
  • [5] CIVIDANES, L.; BRUNELLI, D.; ANTUNES, E.; CORAT, E.; SAKANE, K.; THIM, G. Cure study of epoxy resin reinforced with multiwalled carbon nanotubes by raman and luminescence spectroscopy. Journal of Applied Polymer Science., v.27,p. 544-553, 2012.
  • [6] CIVIDANES, L.; SIMONETTI, E.; MORAES, M.; FERNANDES, F.; THIM, G. Influence of carbon nanotubes on epoxy resin cure reaction using different techniques: A comprehensive review. Polymer Engineering and Science., v.54,p. 2461-2469, 2014.
  • [7] HAM, H.; CHOI, Y.; CHUNG, I. An explanation of dispersion states of single walled carbon nanotubes in solvents and aqueous surfactant solutions using solubility parameters. Journal of Colloid and Interface Science., v.286, p.216-223, 2005.
  • [8] HUANG, W.; WANG, Y.; LUO, G.; WEI, F. 99.9% purity multi-walled carbon nanotubes by vacuum high-temperature annealing. Carbon., v.41,p. 2585-2590, 2003.
  • [9] IIJIMA, S. Helical microtubules of graphitic carbon. Nature (London)., v.354,p. 56-58, 1991.
  • [10] KIM, S.; KIM, T.; Kim, Y.; CHOI, H.; LIM, H., YANG, S.; PARK, C. Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers. Carbon., v.50,p. 3-33, 2012.
  • [11] KIM, S.; LEE, Y.; KIM, D.; LEE, K., KIM, B.; Hussain, M.; CHOA, Y. Estimation of dispersion stability of uv-ozone treated multi-walled carbon nanotubes and their electrical properties. Carbon., v.52,p. 346-354, 2013.
  • [12] MA, P.; SIDDIQUI, N.; MAROM, G.; KIM, J. Dispersion and functionalization of carbon nanotubes for polymer based nanocomposites: A review. Composites:Part A., v.41,p. 1345-1367, 2010.
  • [13] MAHAJAN, A.; KINGON, A.; KUKOVECZ, A.; KONYA, Z.; VILARINHO, P. Studies on the thermal decomposition of multiwall carbon nanotubes under different atmospheres. Materials Letters., v.90,p. 165-168, 20
  • [14] RAHIMPOUR, A.; JAHANSHAHI, M.; KHALILI, S.; MOLLAHOSSEINI, A.; ZIREPOUR, A.; RAJAEIAN, B. Novel functionalized carbon nanotubes for improving the surface properties and performance of polyethersulfone (pes) membrane. Desalination., v.286,p. 99-107, 2012.
  • [15] SOARES, M.; VIANA, M.; SCHAEFER, Z.; GANGOLI, V.; CHENG, Y.; CALIMAN, V.; WONG, M.; SILVA, G. Surface modification of carbon black nanoparticles by dodecylamine: Thermal stability and phase transfer in brine medium. Carbon., v.72,p. 287-295, 2014.
  • [16] SUNA, W.; LIUA, Z.; JIANGA, C.; XUEB, Y.; CHUA, W.; ZHAOC, X. Experimental and theoretical investigation on the interaction between palladium nanoparticles and functionalized carbon nanotubes for heck synthesis. Catalysis Today., v.212,p. 206-214, 2013.
  • [17] VUKOVIC, G.; MARINKOVIC, A.; OBRADOVIC, M.; RADMILOVIC, V.; COLIC, M.; ALEKSIC, R.; USKOKOVIC, P. Synthesis, characterization and cytotoxicity of surface amino functionalized water dispersible multiwalled carbon nanotubes. Applied Surface Science., v.55,p. 8067-8075, 2009.
  • [18] ZHAO, Z.; YANGA, Z.; HU, Y.; LI, J.; FAN, X. Multiple functionalization of multi-walled carbon nanotubes with carboxyl and amino groups. Applied Surface Science., v.276,p. 476-481, 2013.
Como citar:

FERREIRA, F. V.; FRANCISCO, W.; CIVIDANES, L. S.; COUTINHO, A. R.; THIM, G. P.; "DODECYLAMINE FUNCTIONALIZATION OF CNT: THERMAL STABILITY AND DISPERSION", p. 2421-2426 . In: Anais do XI Congresso Brasileiro de Engenharia Química em Iniciação Científica [=Blucher Chemical Engineering Proceedings, v. 1, n.3]. ISSN Impresso: 2446-8711. São Paulo: Blucher, 2015.
ISSN 2359-1757, DOI 10.5151/chemeng-cobeqic2015-159-32587-247984

últimos 30 dias | último ano | desde a publicação


downloads


visualizações


indexações